Mini-Chat
  • User avatar
    Michele Benedetti - Thu Nov 30, 2017 1:46 pm

    sorry for english

  • User avatar
    Elektryczny22 - Sun Dec 03, 2017 5:17 am

    Hello ALL

  • User avatar
    Elektryczny22 - Sun Dec 03, 2017 5:18 am

    Can someone help me with sjson?

  • User avatar
    Haresh Arunachalam - Sun Dec 03, 2017 5:41 am

    Hi can anyone tell me, the maximum current the ESP8266 board’s GPIOs can sink and source. So that I dont end up breaking my ESP8266 board, by giving more than the specification.

  • User avatar
    androidfanboy - Tue Dec 05, 2017 7:50 pm

    12mA source

  • User avatar
  • User avatar
    androidfanboy - Tue Dec 05, 2017 7:51 pm

    sounds like source/sink is the same

  • User avatar
    androidfanboy - Tue Dec 05, 2017 7:51 pm

    Actually, espressif says it can sink 20mA, sorry

  • User avatar
    pavandornadula - Tue Dec 05, 2017 11:40 pm

    Hi , I am using nodemcu dev kit and i am running the sample bmp280 sensor test code . I am getting some fatal exception errors : Fatal exception (0): epc1=0x4021accc, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000 . I changed the firmware and baudrate also ?

  • User avatar
    pavandornadula - Tue Dec 05, 2017 11:42 pm

    Can any one suggest any thing to rectify that error?

  • User avatar
    Artanox - Wed Dec 06, 2017 9:42 am

    Hello there

  • User avatar
    Artanox - Wed Dec 06, 2017 9:43 am

    Can i talk with a moderator about a topic submission?

  • User avatar
    AKSHAYKUMAR - Wed Dec 06, 2017 2:20 pm

    hello

  • User avatar
    AKSHAYKUMAR - Wed Dec 06, 2017 2:22 pm

    can anyone tell me how to connect 3 or more then 3 server using esp8266

  • User avatar
    claytonsulivan - Thu Dec 14, 2017 6:28 am

    How to Integrate a Driver (Library) in ESP32 and ESP8266 to work with nRF24L01?

  • User avatar
    rick2nd - Thu Dec 14, 2017 1:52 pm

    i would like to ask a question ( or two ) on the esp8266-01 module

  • User avatar
    rick2nd - Thu Dec 14, 2017 1:58 pm

    ...the baud rate after flashing is 74880 until changed by "user 1 @ 1000" i have tried 115200-no go 9600 version again -no go...

  • User avatar
    rick2nd - Thu Dec 14, 2017 1:58 pm

    what is the baud rate after "user 1 ta

  • User avatar
    rick2nd - Thu Dec 14, 2017 2:00 pm

    tried all of em i can find, same general result.../// as i would expect if i say AT it has to be correct- no guessing or 8266 wount respond

  • User avatar
    rick2nd - Thu Dec 14, 2017 2:07 pm

    ...because i can flash it proves its not communicatiopn or power issues

Who is chatting

No one is chatting  based on users active over the past 15 minutes

Refreshes every 30 seconds
Legend: Administrators, Global moderators