ESP8266 Community Forum

Posted: **Sat May 27, 2017 1:21 pm**

Tried your software today and I get the following output in an endless loop of resets.
Got the same results also without connecting to enc28j60

Code: Select all

DISCOVER sent
 ets Jan  8 2013,rst cause:2, boot mode:(3,0)

load 0x40100000, len 27680, room 16 
tail 0
chksum 0xb9
load 0x3ffe8000, len 2220, room 8 
tail 4
chksum 0xf1
load 0x3ffe88b0, len 4796, room 4 
tail 8
chksum 0xf2
csum 0xf2
sd§load ...
Initialise ENC stack, dhcp if requested
SPI - Using HSPIHttpd init, conn=0x3ffefebc
HttpdWired init, conn=0x3ffefea0

Ready
mode : sta(18:fe:34:da:32:48)
add if0
DISCOVER sent
 ets Jan  8 2013,rst cause:2, boot mode:(3,0)

Posted: **Wed Jun 21, 2017 8:00 am**

The github page gives 404?
https://github.com/Cicero-MF/esp_enc28j60

Posted: **Wed Jun 21, 2017 8:27 am**

It seems that the guy decided to close his github account for unknown reasons ...

Posted: **Wed Jun 21, 2017 9:51 am**

Looks like it just moved to a different Github account:
https://github.com/ESP32DE/esp_enc28j60
while there is another copy at:
https://github.com/klarsys/esp_enc28j60

ESP8266 Community Forum

ENC28J60 - ETHERNET CABLE CONNECTION TO ESP8266 (ESPHTTPD)

Re: ENC28J60 - ETHERNET CABLE CONNECTION TO ESP8266 (ESPHTTP

Re: ENC28J60 - ETHERNET CABLE CONNECTION TO ESP8266 (ESPHTTP

Re: ENC28J60 - ETHERNET CABLE CONNECTION TO ESP8266 (ESPHTTP

Re: ENC28J60 - ETHERNET CABLE CONNECTION TO ESP8266 (ESPHTTP