- Sun Oct 18, 2015 8:09 am
#31646
I've interfaced the module with a pc through MAX232. But when I try to give AT commands, the module returns me garbage values. I'm using a proper 3.3V supply and have connected the rxd and txd pins to txd and rxd respectively on the MAX232. CH_PD is to Vcc. Please advise.
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]