Re: Wemos D1 mini - accidentally shorted 3.3v and ground
Posted:
Tue Jul 11, 2017 1:13 pm
by martinayotte
I don't see any polyfuse on the schematic ...
Re: Wemos D1 mini - accidentally shorted 3.3v and ground
Posted:
Thu Jul 13, 2017 2:29 am
by Mark Osvath
Hello Guys,
I waited two days. It didn't resolve the issue, so I replaced the regulator. It didn't help.
Anyway I appreciate your support.
Regards,
Mark
Re: Wemos D1 mini - accidentally shorted 3.3v and ground
Posted:
Thu Jul 13, 2017 7:54 pm
by QuickFix
Apart from the fact that servicing a module like a WeMos is probably more expensive than buying a new one, it should be fairly easy to check the power voltages (or lack of) on the ESP using a multimeter.
This page has an overview and schematics of the WeMos board.
Re: Wemos D1 mini - accidentally shorted 3.3v and ground
Posted:
Sat Mar 10, 2018 10:47 am
by MagnusT
It is very likely the diode D2 on the schematics that's broken. An easy and cheap fix.
http://escapequotes.net/esp8266-wemos-d ... d-diagram/How would I know? Been there done that