Re: ESP-12F | Arduino IDE | Sometimes works sometimes not
Posted: Tue Jan 23, 2018 3:59 pm
Hi guys,
I'm sorry for this late reply.
Finally I got my hands on the strip board and spent some time to built it.
As you may note there are some modifications in the adapter plate. I removed the SMD resistors and placed 10K resistors between the adapter plate and the strip board.
At this point I think the whole process is a little bit reliable.
However, I think maybe my problem is now related with the flash cycle count. I read here about it.
In the next weekend I'm going to replace my first one ESP12F to another unused.
I'll give replies about it.
Thank you in advance.
Regards,
LA
I'm sorry for this late reply.
Finally I got my hands on the strip board and spent some time to built it.
As you may note there are some modifications in the adapter plate. I removed the SMD resistors and placed 10K resistors between the adapter plate and the strip board.
At this point I think the whole process is a little bit reliable.
However, I think maybe my problem is now related with the flash cycle count. I read here about it.
In the next weekend I'm going to replace my first one ESP12F to another unused.
I'll give replies about it.
Thank you in advance.
Regards,
LA