martinayotte wrote:Then, maybe your wiring ?
Do you have proper pullups on RES/CH_PD/GPIOI2/GPIO0 and pulldown on GPIO15 ?
[newbie here] Could you please expand on that it seems to be common knowledge but I can't work it out:-( I don't have stability issues on my first board a Wemos D1 mini but its still only on the bread board.
You simply need pullups on RES/CH_PD/GPIOI2/GPIO0 and pulldown on GPIO15.
martinayotte wrote:What instability do you have ?
You simply need pullups on RES/CH_PD/GPIOI2/GPIO0 and pulldown on GPIO15.
All is good everything came together suddenly for this newbie!
I've been flashing (10s of times) a Wemos D1 mini pro and its fine thru serial. But OTA upload was very flakey mostly crashes after upload. This was testing while powered from FTDI with jumpers. Once I powered it from the onboard micro USB its fine. Feeling stupid for having wired it the long way round!
I've got no pull ups/down and its working fine with my first door sensor still only on a breadboard. I do have a resistor for the sensor though.
Now on to smartening up the code.