ESP8266 Community Forum

- Mon May 02, 2016 6:58 am #46679 Managed to upload BASIC on the nEXT EVO board.

Process is straight forward, press Flash button & Reset & Go go.

All nice and dandy BUT:
- No new wifi network available to connect
- on the serial connection I can see the boot image from below:

ESP_Basic_BOOT_1_s.jpg

What's next?

Waiting guidance from Basic users for what to do next

You do not have the required permissions to view the files attached to this post.

ESP8266 MPDMv4 AC MAINS Dimmer Home: http://esp8266-projects.com/2016/04/mpdmv4-mains-dimmerswitch-html/
Available on Tindie: https://www.tindie.com/products/nEXT_EVO1/universal-ac-mains-dimmer-mpdmv41/

- Mon May 02, 2016 8:00 am #46684 connect your browser and point to http://192.168.2.104.

- Mon May 02, 2016 8:09 am #46685 As I said is no new WIFI network to connect thru browser in AP mode.

Nothing on 192.168.2.104. And it's make sense as no WIFI network configured yet in client mode, just uploaded a fresh firmware with Basic.

ESP8266 MPDMv4 AC MAINS Dimmer Home: http://esp8266-projects.com/2016/04/mpdmv4-mains-dimmerswitch-html/
Available on Tindie: https://www.tindie.com/products/nEXT_EVO1/universal-ac-mains-dimmer-mpdmv41/

- Mon May 02, 2016 8:33 am #46688 Yes, it looks like it's connected to something but there isn't no WIFI network name.
The best is to format the flash disk.
To do that, you can use the same flasher utility but choose the button format instead of firmware.
Then flash again the firmware.
After restart, it should display as an AP mode named ESP.