ESP8266 Community Forum

- Tue Jul 26, 2016 1:20 pm #51535 Am I the only person who is having problems connecting to the router with Version 3?

On V2 I rarely have problems, I set the name and password in the "Station Mode" boxes and save it, then when I reboot the ESP it connects 95% of the time to the router, if it doesn't I reboot it again and it connects

With Version 3 it will NOT connect about 95% of the time and only connects on power up about 5% of the time.

this

- Tue Jul 26, 2016 4:00 pm #51544 Have you tried hitting format on the setting page? I have not had any trouble with this on v3

Serial terminal in the chrome browser see https://serialTerminal.com

http://esp8266basic.com
A BASIC interpreter for your ESP

Working now on Autodrop3d. A 3d printer with automatic part ejection system. https://autodrop3d.com

- Wed Jul 27, 2016 3:17 am #51572 I hadn't, I'd gone back to V2 but I just flashed V3 again and tried formatting it both with the format in the flasher, and the format on the settings page.
neither worked.

Also using the "connect" command within a program does not work either

Last edited by lew247 on Wed Jul 27, 2016 9:03 am, edited 1 time in total.

this

- Wed Jul 27, 2016 4:16 am #51574 I have the excact same problem. I have never had any problems with version 2 but with version 3 the ESP
will only very rarely connect to the router. When it finally connect it will only stay connected for very short time.

The router I use is a Linksys E4200