Post links and attach files for documentation here, also chat about these docs freely

User avatar
By martinayotte
#29372 Although it is not a good practice, tying RES pin directly to VCC can not cause some damage because it never becomes initialized as an output, unlike GPIOs where tying them to VCC or GND can destroy them if they become initialized to an output, like GPIO15/GPIO2/GPIO0.
You're right, for the 1K pullups/pulldowns, it is a bit to strong, I would recommend 4K7 or 10K.
User avatar
By kenn
#29397
Lotus wrote:1K pullups and pulldowns are a power hog too!


How so? If those pins aren't used as outputs, then there's no serious current being pulled through those resistors except for when a pushbutton is hit.
User avatar
By Koelie2
#29562
vgamesx1 wrote:
Koelie2 wrote:when shopping on my favorite store, i found a new module: the 12F

http://world.taobao.com/item/521945102409.htm?spm=a312a.7700714.0.0.8C26Cc#detail

it should have improved stability, better antenna, 4 layer pcb.
i couldn't find any documentation but when its available i will post it here. when the new units arrive i will post the decap photo's here.

cheers.


Unless it wasn't already there 4 days ago, then you must not have looked very hard because it's stated right in the product description... Now of course it is in chinese but I've translated it using google, so do expect some errors, though it's not a plain copy/paste, I did properly copy the tables, images, etc.. to make it easier to read.
I've linked it as a .docx attachment or you can view it on google docs here.



Hey Kurt, thanks for supplying the info + translation :D