-->
Page 4 of 4

Re: New ESP module (ESP-12F)

PostPosted: Thu Feb 11, 2016 8:06 am
by acca
I found the solution : i had to create FS using https://github.com/esp8266/arduino-esp8266fs-plugin

Regards

Re: New ESP module (ESP-12F)

PostPosted: Sat Oct 08, 2016 7:47 am
by Mai Mariarti
Lotus wrote:I wonder why the RESET pin is showed tied high without a pull up.
1K pullups and pulldowns are a power hog too!

I'd use a o.o1 uF cap and tie the reset line to ground. On power-up, it will keep the RST line low as the cap charges up to Vcc