Re: FastLED Sketch works with another board but not ESP8266
Posted: Sun Mar 19, 2017 9:52 pm
gbafamily1 wrote:Could be 3.3V versus 5V logic levels. If the LEDs are powered with 5V, the data in pin should used 5V logic. If the LEDs are powered with 3.7V (for example, from a Lithium battery), 3.3V on data in pin should work.
https://learn.adafruit.com/adafruit-neo ... -practices
NeoPixelBus is optimized for the ESP8266. I am not sure if this is true for FastLED.
Thanks GBA. Stumbled upon this last night but the link you have sums it all up nicely. Cheers!