I downloaded a copy of release 14 from
https://github.com/eriksl/esp8266-unive ... e/releases using the two files espiobridge-plain-iram-0x000000.bin and espiobridge-plain-irom-0x010000.bin. I flashed these to a esp-01 but I can't ever see the "esp" ssid show up from either my smartphone or computer. It does seem to be trying go into AP mode though from the debug output, but I can never see the ssid on my phone. Debug output is copied below. Any ideas? I haven't tried building from source code and would like to avoid that if possible.
Thanks.
...
no esp found, reconnect after 1s
reconnect
f 0, scandone
no esp found, reconnect after 1s
...
f 0, * set wlan mode to ap, ssid="esp", passwd="espespesp", channel=13
scandone
del if0
usl
mode : softAP(1a:fe:34:cb:1e:69)
add if1
dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)
bcn 100
bcn 0
del if1
usl
add if1
dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)
bcn 100
chg_A3:-180
...