NodeMCU 1.0 (ESP-12E Module) compile error from Arduino IDE

Post topics, source code that relate to the Arduino Platform
 Reply

User avatar

NodeMCU 1.0 (ESP-12E Module) compile error from Arduino IDE

By mtnbkrrick
- Fri May 06, 2016 2:32 pm #47002 Hello,
I'm looking to use this board and upload some code and I get the following error. Any suggestions. I apologize if this is the wrong place to ask. Any suggestions would be wonderful. Thanks!




Arduino: 1.6.8 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200, 4M (3M SPIFFS)"

Build options changed, rebuilding all
C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp: In member function 'void BitVoicerSerial::processAudio(unsigned int)':

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:202:7: error: 'ADCSRA' was not declared in this scope

sbi(ADCSRA, ADSC);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:202:15: error: 'ADSC' was not declared in this scope

sbi(ADCSRA, ADSC);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:202:19: error: 'sbi' was not declared in this scope

sbi(ADCSRA, ADSC);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:204:33: error: 'bit_is_set' was not declared in this scope

while (bit_is_set(ADCSRA, ADSC));

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:206:16: error: 'ADCH' was not declared in this scope

Serial.write(ADCH);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp: In member function 'void BitVoicerSerial::setAudioInput(uint8_t)':

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:228:3: error: 'ADMUX' was not declared in this scope

ADMUX = ((_bvAnalogReference << 5) | (pin & 0x07));

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:232:7: error: 'ADCSRA' was not declared in this scope

sbi(ADCSRA, ADPS2);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:232:15: error: 'ADPS2' was not declared in this scope

sbi(ADCSRA, ADPS2);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:232:20: error: 'sbi' was not declared in this scope

sbi(ADCSRA, ADPS2);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:233:15: error: 'ADPS1' was not declared in this scope

sbi(ADCSRA, ADPS1);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:234:15: error: 'ADPS0' was not declared in this scope

cbi(ADCSRA, ADPS0);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:234:20: error: 'cbi' was not declared in this scope

cbi(ADCSRA, ADPS0);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp: In member function 'void BitVoicerSerial::undoAudioInput()':

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:240:3: error: 'ADMUX' was not declared in this scope

ADMUX = 0x00;

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:241:7: error: 'ADCSRA' was not declared in this scope

sbi(ADCSRA, ADPS2);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:241:15: error: 'ADPS2' was not declared in this scope

sbi(ADCSRA, ADPS2);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:241:20: error: 'sbi' was not declared in this scope

sbi(ADCSRA, ADPS2);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:242:15: error: 'ADPS1' was not declared in this scope

sbi(ADCSRA, ADPS1);

^

C:\Program Files (x86)\Arduino\libraries\BitVoicer11\BitVoicer11.cpp:243:15: error: 'ADPS0' was not declared in this scope

sbi(ADCSRA, ADPS0);

^

exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
 Reply
Return to Arduino