I have tried to pilot OLED screen from Basic ESP. it works perfect with the 128x64 screen.
I also tried with the 128x32, but this one is seen as a 128x64 and so the draw is not great.
if you can add the support of this screen would be nice.
Explore... Chat... Share...
its1000 wrote:I also tried with the 128x32, but this one is seen as a 128x64 and so the draw is not great.
Well, wherever you read that you can power an esp8[…]
This is a simple one. https://gist.github.com/bb[…]
Have a look at wifiMulti. http://arduino-esp8266.[…]
In client mode can the ESP8266 connect to a hidden[…]
This was a fun one for me. I initially built the M[…]
Hello. Is there a callback I can register somehow[…]
The serial data being received from the device pro[…]
The following is the code for the RTC that works […]
Any ideas how I can send a command between an ipho[…]
Hi... Objective: I want to control a relay connec[…]
me too!!!!!!!!!!!!!!!!!!!.....shouldnt be so diffi[…]
Most likely the same or similar to these : Basical[…]
Should it not be wire.begin(4,5); SDA connected t[…]
So it sounds as though only 500mA or greater PSU a[…]
Hi, i added a external RAM and it work great. Now[…]
I finally said forget using it as-is with trying s[…]
Agreed, heckler. I had the usual problems when de[…]
Try downloading the Latest Printed Reference - see[…]
Hello everyone, I am using a NodeMCU development […]
seems that the library has changed a bit. See her[…]