I have tried to pilot OLED screen from Basic ESP. it works perfect with the 128x64 screen.
I also tried with the 128x32, but this one is seen as a 128x64 and so the draw is not great.
if you can add the support of this screen would be nice.
Explore... Chat... Share...
its1000 wrote:I also tried with the 128x32, but this one is seen as a 128x64 and so the draw is not great.
Whats the industry standard for the max low? From […]
Here's my "diagnostic print" function w[…]
Great explanation than you I suspect the mqtt code[…]
Sure. :) Pin definition: #define interruptPin 2 […]
ok nobody answered. Sorry about that, but I'm af[…]
As I understand from the documentation, the NEO6MV[…]
Do you mean: "How do I make a backup of the […]
Have you measured the voltage on the pin and the o[…]
...This all is clear for me. I wrote wrapper base[…]
Phil - we are somewhat off topic but maybe that's […]
@David Reid eX compiles and links successfully ag[…]
OK, I think I've just found it. ArduinoOTA.setHost[…]
Hi marinayotte ! Do you see my mistake ? Never ha[…]
as it is interpreted by the basic interpreter, I d[…]
If your power outage is long it might also ruin yo[…]
That was my first approach, but then I couldn't ac[…]
Good recommendation: I am using that library and i[…]
Well done for posting all the code. I can't begin […]
Gibberish followed by sensible text when you have […]