replace httpServer.send(200, "text/html", MAIN_page); with httpServer.send_P(200, "text/html", MAIN_page, sizeof(MAIN_page));
there are _P methods for direct PROGMEM output (see ESP8266WebServer.h)
Explore... Chat... Share...
error E (49837) uart: uart_write_bytes(1159): buffer null
server.sendContent(small_string)
#include <InqPortal.h>
InqPortal svr;
void setup()
{
svr.begin("FirstPortal", NULL,
"<your router SSID>", "<your router Password>");
}
loop() {}
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]