ESP8266 Community Forum

Posted: **Wed Jan 25, 2017 3:44 pm**

Yes I've followed the Modem procedure for the Port forwarding and I've assigned the port 80 to the ESP.
Also the Internet provider confirmed me remotely that the port 80 is assigned to the ESP. Their question was if the port 80 is the correct one to assign for the ESP. Is there any other port that I can test?

Posted: **Tue Jan 31, 2017 12:30 pm**

Any help please? Or any other procedure to send http commands to the ESP with a pubblic IP?

Posted: **Wed Feb 01, 2017 2:13 am**

No, port 80 is the correct port, there is no need to try any other; and the procedure is the typical procedure for this kind of setup. I would check again the configuration in the router, and see if there is anything wrong there.

Posted: **Fri Feb 03, 2017 3:26 pm**

The router is set correctly. In my opinion the ESP is not configured correctly! I'll look for other solutions.

ESP8266 Community Forum

Sending a HTTP string to the ESP using a Public IP address

Re: Sending a HTTP string to the ESP using a Public IP addre

Re: Sending a HTTP string to the ESP using a Public IP addre

Re: Sending a HTTP string to the ESP using a Public IP addre

Re: Sending a HTTP string to the ESP using a Public IP addre