ESP8266 Community Forum

Posted: **Thu Oct 29, 2015 6:44 am**

steves wrote:I had a similar problem with the ESP-01 module: with no load attached to the relay it worked fine, but with any load (even 5W) the ESP would reset itself more often than not.

I solved the problem with a 10n capacitor soldered directly to the Vcc and GND pins - seems that the module has no bypass capacitor installed. I also added 10k and 100n on RST line, but I'm pretty sure that it was the 10n that solved it. It has worked 100% reliably ever since.

Anyway, I just put a full writeup of the project up on my blog http://telecnatron.com/articles/ESP8266-WIFI-Remote-Controlled-Mains-Switch/index.html, which you may find useful.

Cheers,
Steve

Can you upload your ESP-01 Images with the caps and stuff soldered ?

Posted: **Thu Oct 29, 2015 7:17 am**

Your Solution is working when i am switching the relay through software but i also am switching the relay states using a manual two way switch and it is still causing resets.Any Inputs on this ?

Posted: **Fri Feb 19, 2016 1:15 am**

My problem olve when i cut the reset pin on esp8266 ... :mrgreen:

Posted: **Wed Feb 24, 2016 4:03 am**

HolgerW wrote:hi,
i use 9 ESP03 and 4 ESP12 with relay (driven by mosfet), they never reset while switch 230V up to 1000W.
Holger

can you share the schismatics you are using , thanks in advance

ESP8266 Community Forum

ESP-01 resets when switching relay board

Re: ESP-01 resets when switching relay board

Re: ESP-01 resets when switching relay board

Re: ESP-01 resets when switching relay board

Re: ESP-01 resets when switching relay board