Re: ESP8266EX Breakout/Dev Board
Posted: Mon Sep 22, 2014 12:03 pm
10mils came from the molex appnote on the antenna. Still a mismatch on the SMA connector.... I know ...
A Transistor on GPIO0 would be an option. I still see a use for GPIO0 , even when it has to be at a defined level at boot up. Such GPIO/bootstrap behaviour is quite common on SoCs. E.g. it still could be used as (Soft)I2C SDA for example.
A Transistor on GPIO0 would be an option. I still see a use for GPIO0 , even when it has to be at a defined level at boot up. Such GPIO/bootstrap behaviour is quite common on SoCs. E.g. it still could be used as (Soft)I2C SDA for example.