Re: Cadsoft Eagle Library ESP8266 modules.
Posted:
Tue May 19, 2015 3:08 pmby mer
Hi, i measure this esp-201
MY module:
I hope this measurements will be helpfull
Cheers
Re: Cadsoft Eagle Library ESP8266 modules.
Posted:
Thu May 21, 2015 2:07 pmby magnat
The ESP-201 is now in the library.
https://github.com/onkelfunny/ESP8266-Eagle_LibraryCan someone who has the module check the size?
Re: Cadsoft Eagle Library ESP8266 modules.
Posted:
Fri May 22, 2015 2:05 pmby rtenklooster
Hi, the 201 is almost right.
The right pin row needs to be more to the right. When i allign the left pin on the center of the left pad, the right pin is just touching the right side of the pad. So those pins needs to be placed more to the right.
The tx rx pins are aligned the right way.
Re: Cadsoft Eagle Library ESP8266 modules.
Posted:
Fri May 22, 2015 3:58 pmby rtenklooster
Because i can't edit my previous post, it appears the bottom two gnd and vcc pins are not treated like they are internally connected. I created a scematic, and in the board layout it wants to connect both pins to each other. See the attached image.