- Sun Jan 18, 2015 7:28 pm
#7652
Hi phil31 and fadi i' have found some datas about it on http://www.ai-thinker.com (same board )
smoky from 33 LoL
smoky from 33 LoL
- Wed May 13, 2015 9:15 am
#17311
This link contains all information about using this card, but is in Chinese.
I believe that gives to program the microcontroller STC15W408AS which is on the board to create our applications using Keil.
http://www.ai-thinker.com/forum.php?mod ... ra=&page=1
I believe that gives to program the microcontroller STC15W408AS which is on the board to create our applications using Keil.
http://www.ai-thinker.com/forum.php?mod ... ra=&page=1
- Thu Jun 25, 2015 7:57 pm
#21703
Here is a link to slightly improved english manual. The images have been converted to a white background for printing.
https://copy.com/uf7Ft0lzoHTN9QTv
https://copy.com/uf7Ft0lzoHTN9QTv
- Fri Jan 08, 2016 9:40 am
#38211
So I ripped the STM off my board so that I use the 3 LED's (pins 18-20) and the Buzzer (pin 15) wired to ESP GPIO lines and so its not wasting power
Might move the CDS to the ESP ADC pin set.
Might made a small ESP12X adapter board too then this would be quite a nice little experimenting board.
Or just use it as a powered, single mains relay board with a couple of sensors. Yep thats it - found a use for it at last!
Might move the CDS to the ESP ADC pin set.
Might made a small ESP12X adapter board too then this would be quite a nice little experimenting board.
Or just use it as a powered, single mains relay board with a couple of sensors. Yep thats it - found a use for it at last!
