I'm trying to use espbasic.
All is ok about the installation, but when I try to program : print "hello world"
the sytem return "done" but I can't see the text "hello world" on the screen of my phone...
Some ideas ?
Tks a lot.
Explore... Chat... Share...
heckler wrote:hi dalien,
It would be helpful if you posted your exact code that you have written.
have you tried to use "wprint" ??
It has been my experience that the FTDI does not h[…]
On board connection for deep sleep via resistor wi[…]
First, Thanks for the response.I note that the ex[…]
Both hardware and software watchdogs are there to […]
I put a ZIP-archive under http://www.wunderwald.c[…]
NodeMCU D1 Mini boards, I know of NodeMCU V1/2/[…]
Hi there, I'm trying to adopt the sketch bellow t[…]
I've created a simple Internet synchronized clock […]
The trick is remembering that Lua is interpreted, […]
I've put an instructable up describing a esp-12 ba[…]
Moved block of code responsible for every 15 minut[…]
if you look at the 10min and 1h value, you'll see […]
These modules normally have an internal pull up re[…]
The hardware actually seems to be identical, at le[…]
Rename or delete the C:\Users\admin\Documents\Ardu[…]
Hello, I am using esp-open-rtos and I am communi[…]
Thanks to all for replying! This is due to the f[…]
And you are sure you were able to configure the ti[…]
Just philosophising here (I wrote something simila[…]