Re: Flashing keeps failing at 12% with timed out waiting
Posted:
Mon Oct 05, 2020 12:10 pmby schufti
> Chip erase completed successfully in 0.1s
not very realistic.
Flash seems to be defective, try to replace flash chip.
Re: Flashing keeps failing at 12% with timed out waiting
Posted:
Mon Oct 05, 2020 8:42 pmby davydnorris
If you haven't already, try downloading the very latest esptool.py - I remember having similar issues a while back and it was the esptool version
https://github.com/espressif/esptool
Re: Flashing keeps failing at 12% with timed out waiting
Posted:
Thu Oct 22, 2020 4:13 pmby GabeZ
Well, turned out I forgot to put the jumper back on the 3.3V / VCC connectors. The manual I was following show an USBTTL without jumpers and I had made sure that the 3.3V from the board was connected to the 3.3V connector of the USBTTL. But I had removed the jumper that connects 3.3V and VCC on the USBTTL.
Without it gave 3.220V, with jumper 3.7V. After this it worked.