- Mon Sep 11, 2017 8:06 am
#69888
I figured it out in the end.
EN (marked CH_PD in some places) needs to stay pulled up to 3.3v.
GPIO0 needs pulling up to 3.3v via a 10k resistor.
GPIO15 needs to be pulled to ground (leave it as it is).
The FTDI is fine to power the thing.
EN (marked CH_PD in some places) needs to stay pulled up to 3.3v.
GPIO0 needs pulling up to 3.3v via a 10k resistor.
GPIO15 needs to be pulled to ground (leave it as it is).
The FTDI is fine to power the thing.
