Same code and same hardware design. Only change was to reinstall Arduino ide 1.8.5 and libraries after rebuilding my computer.
Anybody have any idea what might be going on? Thanks.
Explore... Chat... Share...
According to a previous post that is the pressure […]
Congrats on doing a solid investigation - somethin[…]
I found the culprit. I ended up removing the shie[…]
the problematic setting wouldn't be the low size B[…]
This is really nice work well done. It could be w[…]
It your espconn_connect() returns a non-zero value[…]
On board connection for deep sleep via resistor wi[…]
First, Thanks for the response.I note that the ex[…]
Both hardware and software watchdogs are there to […]
I put a ZIP-archive under http://www.wunderwald.c[…]
NodeMCU D1 Mini boards, I know of NodeMCU V1/2/[…]
Hi there, I'm trying to adopt the sketch bellow t[…]
I've created a simple Internet synchronized clock […]
The trick is remembering that Lua is interpreted, […]
Moved block of code responsible for every 15 minut[…]
if you look at the 10min and 1h value, you'll see […]
The hardware actually seems to be identical, at le[…]
Rename or delete the C:\Users\admin\Documents\Ardu[…]
Hello, I am using esp-open-rtos and I am communi[…]