Error Send Code NodeMcu 8266 12-E V3
Posted: Sun Dec 02, 2018 8:55 pmHello, I'm new to NodeMCU 8266 12E V3
Using the arduino interface by installing ch340G drivers, or switching from cable to machine, between mac and windows.
I can not write any blink code.
I already did, grounding between D8 and GND
I already did, I pressed the flash I clicked the rst and kept my finger on the flash and it did not work
I held the flash and put the USB cable and tried and nothing too.
Already, I solved the ESP-12
Already, I solved the ch340g
Erro na IDE Arduino
Uploading 252016 bytes from /var/folders/mx/4xsply7148171f1l0_kwpppr0000gn/T/arduino_build_771144/Blink.ino.bin to flash at 0x00000000
warning: espcomm_send_command: didn't receive command response
Ocorreu um erro enquanto o sketch era carregado
warning: espcomm_send_command(FLASH_DOWNLOAD_BEGIN) failed
error: espcomm_upload_mem failed
follow photos of the model of my esp
SOS!!!
Using the arduino interface by installing ch340G drivers, or switching from cable to machine, between mac and windows.
I can not write any blink code.
I already did, grounding between D8 and GND
I already did, I pressed the flash I clicked the rst and kept my finger on the flash and it did not work
I held the flash and put the USB cable and tried and nothing too.
Already, I solved the ESP-12
Already, I solved the ch340g
Erro na IDE Arduino
Uploading 252016 bytes from /var/folders/mx/4xsply7148171f1l0_kwpppr0000gn/T/arduino_build_771144/Blink.ino.bin to flash at 0x00000000
warning: espcomm_send_command: didn't receive command response
Ocorreu um erro enquanto o sketch era carregado
warning: espcomm_send_command(FLASH_DOWNLOAD_BEGIN) failed
error: espcomm_upload_mem failed
follow photos of the model of my esp
SOS!!!