Re: disabling stand-by mode ESP
Posted:
Thu Aug 20, 2015 10:06 am
by Mario Mikočević
I have problems with WiFiServer too, even raised the issue #691 ..
Very similar example to OP is restarting with wdt for me too.
Basically with SDK 1.3.0 WiFiClient is stable as rock but WiFiServer still have some issues.
--
Mozz
Re: disabling stand-by mode ESP
Posted:
Fri Aug 21, 2015 6:39 am
by manoelps
Thank you all for your return!
martinayotte, which the power supply that uses the ESP, had to make some filter?
Re: disabling stand-by mode ESP
Posted:
Fri Aug 21, 2015 11:41 am
by martinayotte
Personally, I'm using a 5V wall adapter with AMS1117 3.3V regulator with 470uF capacitor.
Re: disabling stand-by mode ESP
Posted:
Wed Aug 26, 2015 5:42 am
by manoelps
Hello everyone, thanks for the help.
I managed to solve, at least so far is working, I used a resistor 22K ESP pin to the transistor that drives the relay, I realized that the ESP when turned on, already linked enabled GPIO and not IP ascribed or even he was blinking.
[portuguese]
Olá pessoal, obrigado pela ajuda.
I consegui resolver, pelo menos até o momento está funcionando, eu usei um resistor de 22K do pino do ESP para o transistor que aciona o relé, eu percebi que o ESP quando ligado, ja ligava o GPIO ativado e não atribuia IP, ou mesmo ficava piscando.