// Initialize the OLED display using Wire library
SSD1306 display(0x3c, D2, D1);
From the IDE I've run the SSD1306DrawingDemo and the display is garbled, I can make our the word "working" though.
Explore... Chat... Share...
Moderator: Mmiscool
// Initialize the OLED display using Wire library
SSD1306 display(0x3c, D2, D1);
let v = 100
i2c.setup(4,5)
lcdbl 1
oledcls
oledprint "Hello", 0, 0
oledprint v, 3, 3
wait
#include "SH1106.h" // alias for `#include "SSD1306Wire.h"`
// Initialize the OLED display using Wire library
// SSD1306 display(0x3c, D3, D5);
SH1106 display(0x3c, D2, D1);
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]