The webIDE is awesome. you can connect and post new code to any ESP running on your lan at any time. No need to wire it through FTDI once you have firmware installed.
Explore... Chat... Share...
The code you installed was likely meant for the ES[…]
Thanks a lot for sharing this project.
Yes, there are examples of connecting to an ESP826[…]
Which project, dear? Did you forget to put the pro[…]
Using an ESP8266 to read the duty cycle of the sea[…]
Positioning the ESP-32 on top to dissipate heat is[…]
It sounds like the two Sonoff Basic devices you ar[…]
You can try the solution given here: https://stack[…]
Some similar problems have been discussed in the f[…]
If you're facing issues with the anemometer, you c[…]
I understand that delay Microseconds might be clos[…]
It looks as though you are not passing enough para[…]
What's the chronology of your work here? Are you c[…]
May be implementing a simple http-server running o[…]
Hi, I can see that you have called the ESP.deepS[…]
The issue is solved. 1) TTUSB0 is taken by BRLTTY […]
You have to install the <FirebaseESP8266.h> […]
I decided to use 3.2 V lifopo4 battery and discard[…]
An official web portal created by Kroger is called[…]