Page 2 of 3
Re: New A6 GSM module from AI
Posted:
Thu Jul 14, 2016 2:33 pm
by martinayotte
It has an MCU also, but firmware is probably hard-coded and dedicated to GSM.
Even if it would be programmable, you will loose the original firmware, therefore GSM will be gone, except if Espressif/AIThinker provide an SDK for it, which is not the case currently.
Re: New A6 GSM module from AI
Posted:
Sat Aug 27, 2016 2:41 am
by EdCasati
Yes, for now the A6 is not a very useful device, aside from a dumb modem. And there is much more involved in connection, power and data management when using Cellular -vs- WiFi than just issuing AT commands.
On the positive side, the 'NC' pins on the commonly shown diagrams have been identified as GPIO pins!
Re: New A6 GSM module from AI
Posted:
Sun Sep 04, 2016 7:38 pm
by Guilherme Brasil
Hi, please, I need support help for A6 Development board
I have error +CME ERROR:50 and nothing works.
ATI
Ai Thinker Co.LTD
A6
V03.02.20160605005H03
at+ccid
+SCID: SIM Card ID: 8955310929954679223
Terminal Status:
newwork is not register
AT
ATE0
OK
AT+CREG?
+CREG: 1,10
OK
^CINIT: 1, 0, 0
^CINIT: 2, 32, 41891
^STN: 37
^CINIT: 4, 8192, 37
^CINIT: 8, 2048, 1
^CINIT: 16, 0, 1638420
^CINIT: 32, 0, 0
+CREG: 0
AT+CREG?
+CREG: 1,10
OK
Start AiCloud Connect
AT+CLDSTART
Start AiCloud Connect
AT+CLDSTOP
+CME ERROR:50
Thanks,
Guilherme
Re: New A6 GSM module from AI
Posted:
Mon Sep 05, 2016 4:22 pm
by RichardS
WOW crazy off topic, but its in General Disc.... so we are good.
No its not that off topic, I am sure lots will like it, I will check it out later when I have more time.
RichardS