Re: not responding AT commands
Posted:
Wed Jun 14, 2017 2:17 pmby cardmaker
They have 8 Mbit like writed above in startup.
i already try many firmware and the strange is always the same cmds issue.
Re: not responding AT commands
Posted:
Wed Jun 14, 2017 7:23 pmby QuickFix
Have a look at this thread on the forum, this guy had the same problem.
According to him, he could solve it by clearing the entire flash first before flashing the actual firmware:
elektronik wrote:I have 8Mbit Flash.
When I upgraded to SDK 2.0.0 AT+CWLAP command also does not find the network.
The problem was solved.
I erased the chip (25F08) and uploaded the firmware again on empty flash.
Strange case, but it works 
Sorry for the spelling, but I'm from Poland.
Re: not responding AT commands
Posted:
Thu Jun 15, 2017 9:29 amby cardmaker
Is not same problem, my modules make the scan but not list the names of avaible network.
also not reponde at some cmds, (even not a "fail").
Re: not responding AT commands
Posted:
Thu Jun 15, 2017 9:53 amby QuickFix
Maybe so, but have you at least tried his solution?
(You also have to try things yourself, you know)