https://www.espressif.com/sites/default ... nes_en.pdf
My question is simple, what will be the consequences of routing and components underneath the antenna area (on the other side)?
Tks
Explore... Chat... Share...
schufti wrote:bad a) EMI and/or b) WiFi
depending on which signals you route close to the antenna, sensors and other evices will probably give false readings (enough examples in div threads) or (if it is control lines) you may experience erratic behaviour of the system.
For WiFi: as the antenna is also receiving (weak) signals from your AP, fast signals with steep edges can signifficantly disturb reception.
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]