ESP8266 Community Forum

- Thu Jun 23, 2022 2:16 am #94832 Hi friends,
I am learning esp programming with Arduino and I think that the best example source code for study is "arduino source code of esp8266 default AT firmware".
Is there any source code like this?
Thanks

- Fri Jun 24, 2022 12:07 am #94846 the AT firmware is not open source

- Fri Nov 11, 2022 6:32 pm #95526 If you had finished installing the board manager or already had installed it then choose the board manager type as "Generic ESP8266 Module." Once you have downloaded GTA San Andreas APK, extract the file and copy the folders. Then open your Arduino folder and click on libraries folder.

- Wed Dec 14, 2022 10:57 pm #95635 If you are just getting started, I would suggest familiarizing yourself with the example sketches you can find in the Arduino IDE menu File > Examples > Examples for <your board> ...
The examples are might be referred to as 'user' code, and a kind of prerequisite to the underlying 'source' code that our sketches run on.

When you're ready, all the open 'source' code can be viewed at https://github.com/esp8266/Arduino/. And when you get to the point where you see something in there that could be improved/removed you can create your very own pull request.

Just to be clear, there is no "Arduino," but there probably is "AI-Thinker" and other AT firmware source code, as was used on some esp8266 chips. Your mission impossible, should you choose to accept it, is to extract your own copy from a board that came with the AT firmware. Then you will have learned much, including that it is compiled, and therefore not the source code. This message will not self destruct, so rest easy.