cal wrote:http://www.esp8266.com/search.php?keywords=make%3A+Nothing+to+be+done+for+%60FORCE%27.
Third result (from the toolchain thread).
viewtopic.php?f=9&t=1237&p=12549&hilit=make%3A+Nothing+to+be+done+for+%60FORCE%27.#p12549
Thanks a lot !
Explore... Chat... Share...
cal wrote:http://www.esp8266.com/search.php?keywords=make%3A+Nothing+to+be+done+for+%60FORCE%27.
Third result (from the toolchain thread).
viewtopic.php?f=9&t=1237&p=12549&hilit=make%3A+Nothing+to+be+done+for+%60FORCE%27.#p12549
Narasing wrote:code uploaded succeeds but ESP8266 (NodeMCU) doesn't run for ESP8266_RTOS_SDK v1.4.0
--
I'm trying to run blinking LED program using ESP8266_RTOS_SDK on LUBUNTU by espressif.
program link-->https://github.com/sarwadenj/ESP8266_RTOS/tree/master/test_2
also i written another program and set WiFi in station mode--->https://github.com/sarwadenj/ESP8266_RTOS/blob/master/wifi/user/user_main.c
I compiled my program using
./gen_misc.sh
and set
STEP 1: use boot_v1.2+ by default
STEP 2: generate bin: user1.bin
STEP 3: spi speed: 40 MHz
STEP 4: spi mode: QIO
STEP 5: spi size: 4096KB
spi ota map: 1024KB + 1024KB
and uploaded code going into Bin_path-->
sudo esptool.py --port /dev/ttyUSB0 write_flash --flash_mode qio 0x2000 user1.4096.new.6.bin
it uploaded successfully but code didn't run. So what should be the problem. is I'm missing something.
Is there any solution for this?
Thanks in advance.
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]