- Mon Oct 19, 2015 1:12 am
#31702
I tried with time.is also, but no result
AT+CIPSTART=0,"TCP","time.is",80
0,CONNECT
OK
AT+CIPSEND=0,37
OK
> GET HEAD / HTTP /1.1\r\nHost: time.is
busy s...
QEND OK
0,CLOSED
This is what I get
When I used google.com to read HEAD
AT+CIPSTART=0,"TCP","time.is",80
0,CONOECT
OK
AT+CIPSEND=0,90
OK
> GET HEAD / HTTP /1.1\r\nHost: time.is\r\n
AccÙpt: *?*\r\nUser_Agent: Google Chrome/46.0.2490.71m
busy s...
+IPD,0,384:HTTP/1.1 408 Request Time-out
D`ìe: Mon, 19 Oct 200,C
I got some data but not complete data
What am I doing is I interfaced ESP8366 with arduino uno and sending commands to ESP8266 through serial port and reading the Echos. My program is as follows:
#include <SoftwareSerial.h>
SoftwareSerial dbgSerial(10, 11); // RX, TX
int const led = 9;
int const debugLed = 13;
char myChar;
void setup() {
pinMode(led, OUTPUT);
pinMode(debugLed, OUTPUT);
//blink debugLed to indicate power up
for (int i = 0; i < 15; i++)
{
digitalWrite(debugLed, HIGH);
delay(50);
digitalWrite(debugLed, LOW);
delay(50);
}
Serial.begin(115200);
Serial.setTimeout(5000);
//dbgSerial.begin(19200); //can't be faster than 19200 for softserial
dbgSerial.begin(115200); //38400 works fine for me
dbgSerial.println("AT+RST");
delay(100);
}
void loop() {
while (dbgSerial.available())
{
myChar = dbgSerial.read();
Serial.print(myChar);
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(50);
}
while (Serial.available())
{
myChar = Serial.read();
delay(25);
dbgSerial.print(myChar);
}
}
when I run this program initially ESP8266 starts resetting but stops in between as below:
AT+RST
OK
ets Jan 8 2013,rst cause94, boot modd:(3,7)
wft reset
losl
What is the problem? why I am unable to get accurate output. I am struggling with this since a week. My purpose is to fetch time from internet using ESP8266 and display clock using LED strip.
