Your new topic does not fit any of the above??? Check first. Then post here. Thanks.

Moderator: igrr

User avatar
By pbecchi
#43874 Dont discourage .......

First be sure that your ESP8266 core library are uptodate D0,D1....D16 are internal core definition for GPIO pins
Second have a look to this https://opensprinkler.com/forums/topic/ ... post-41724
Somebody elsehas already compiled succesfully my code (it indicate another link for the i2c lcd library)!

I hope you succed soon!
User avatar
By alextu
#43880 hi, thanks for the hint, i managed to compile. here s a summary, for people wanting to do the same:

- move all files in the ino containing folder 'OpenSprinkler_Arduino_W5100'
- go through all files and change the #include s to from "../lib.h" to "lib.h"
- use liquid crystal library from here https://bitbucket.org/fmalpartida/new-l ... V1.2.1.zip
- use time lib from here https://github.com/PaulStoffregen/Time
- use DS1307RTC lib from here https://github.com/PaulStoffregen/DS1307RTC
- select nodemcu as a board, or some board type, NOT generic

btw, you will probably need to move from D1....D7 .... DX pins to gpio numbers, if you select generic board, it does not work, they are not defined. Or maybe a ifndef on one of them and define if they are not there

i ll be back for more
User avatar
By alextu
#43883 now stuck in an endless loop, does the below, restart, try again

Code: Select allload 0x4010f000, len 1264, room 16
Started...
wire begin
Scanning..I2C.....
I2C device found at address 0x68   DS3231


@104
done

0
<W>0<W>0<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>10<W>10<W>16<W>0<W>12/stns.dat
OptSetup...
weather.opensprinkler.com
25
255
Reset EEPROM
0 128 256 384 512 640 768 896 1024 1152 1280 1408 1536 1664 1792 1920 wiped
nvdata

fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
fileOpen:/stns.dat
file exist open R/W
0>record written
file written
OptionsWrite OS:216
255
done