What could be wrong? do i really need to flash these three files on the module? is there a single file with the firmware to flash on the module?
PS: i'm using esptool running on OS X to flash the module.
Thanks for your time.
Explore... Chat... Share...
sudo python esptool.py --baud 921600 --port /dev/tty.usbserial-A700fbUH write_flash -fm dio 0x000000 v220.127.116.11\ AT\ Firmware.bin
Running Cesanta flasher stub...
Flash params set to 0x0200
Writing 1044480 @ 0x0... 1044480 (100 %)
Wrote 1044480 bytes at 0x0 in 15.4 seconds (542.6 kbit/s)...
What you are describing to access wifi is called a[…]
Constrained Application Protocol (CoAP) and inde[…]
You got it wrong. You can not return all the varia[…]
As the title implies, I want to connect two ESP822[…]
Oh interesting.... So this is down in the phy lev[…]
I need python support in my gdb for my ESP8266. As[…]
Stuart Pittaway developed a Battery Management Sys[…]
There is an Issue in github reporting the broken […]
There is a new player in town ... and it's from S[…]
This smells like arduino. I moved it there.
You could also just do it by using the ESP8266WebS[…]
Read this post: GPIO Pin states after reset/durin[…]
As far as I know the regular U8Glib is not compa[…]
Hello, it seems that EAP-TLS, which is officially[…]
Hello; I too was very disappointed when buying t[…]
Hi, I have tested AP+STA mode and find out one i[…]
Great project and great work to all involved here![…]
Hi, I Implemented a coap server : #include <c[…]