Same code and same hardware design. Only change was to reinstall Arduino ide 1.8.5 and libraries after rebuilding my computer.
Anybody have any idea what might be going on? Thanks.
Explore... Chat... Share...
I have a ESP-01 module running AT firmware. respo[…]
... remember when porting that "int" on […]
What happens if you run that code on a board that […]
yes, it is running directly off the 4.2 lipo and w[…]
I ran your code (with the same library) on a ESP-1[…]
I'm trying to POST some data from my Wemos D1 mini[…]
Annex is already awesome. Plus there are some sup[…]
The day elements are comma-separated, see how Lady[…]
No. Arduino upload to the ESP8266 overwrites the A[…]
IMO, using ticker is not necessary if you can keep[…]
In order to provide a more complete answer, I shou[…]
Hi void system_deep_sleep(uint32 time_in_us) so […]
Take a look at this. https://arduino-esp8266.read[…]
AFAIK ESP.reset() restarts exactly the same way it[…]
so somewhere in the initialization of your DHT lib[…]
There is one more thing that can happen, which is […]
So aparrently the issue isn't with interrupts. My […]
hi! Have the same issue here, works perfectly on […]
Instead of Fritzing I used my own tool GraphvizFi[…]
I had been chasing a soft WDT that happened to lan[…]