davydnorris wrote:This question can't be answered without understanding how the author of the flash code decided to layout their partitions
For simplicity I only talk about Espressif's SDK+AT firmwares..
davydnorris wrote:but from what I know of the AT flash, you shouldn't have any problems
OK, that's interesting..
I was sure the non-C1 vs C1 are hardware properties.
there are situations where we cannot really choose.
If you have a 32Mbit module/board,
and you want to Flash it with ESP8266_NonOS_AT_Bin_V1.7.1,
then inside the ZIP file, in the bin\at\ folder, you will see this:
There's only a 1024+1024 option,
no 512+512 option,
so this means that some Firmwares dictate choosing only the "-C1" option..