Is any way to do that no high output for IO0 at startup?
Explore... Chat... Share...
donsergio wrote:Is any way to do that no high output for IO0 at startup?
GPIOs 4 and 5 are the only ones that are always high impedance. All others do have internal pull-ups or are even driven low/high during boot.
GPIOs 3, 12, 13 and 14 pulled HIGH during boot. Their actual state does not influence the boot process.
GPIOs 0, 1, 2 and 15 are pulled HIGH during boot and also driven LOW for short periods.
The device will not boot if 0, 1 or 2 is driven LOW during start-up.
GPIO 16 is driven HIGH during boot, don't short to GND.
UPDATE. tried to drive df player via PC with realt[…]
You can try to use my repo: https://github.com/ki[…]
You need to say what type of esp8266 module and ho[…]
Hi, I try to upload txt or simple json data file […]
have you been able to achieve it. i am also trying[…]
On inspection of the Espressif API spi_interface[…]
Well, Content-disposition is response header. Pr[…]
Maybe you could ask the creator of that ESP32 libr[…]
why is everybody messing around with 3rd party nt[…]
Hi, I'm new to the ESP8266 and ESP32 but so far it[…]
i think solved.i deleted Serial.begin(115200)...Ru[…]
Thanks for the reply. I will try to make the lcd w[…]
As for now both esp32, esp8266 cores have same iss[…]
You are welcome. Just one thing - swap the two li[…]
Hi, i want to know how to make the connections and[…]
Hello, I removed any file from my nodemcu using l[…]
Hello, I have the LoLin dev board and I connected[…]
That size seems significant - it's 10 * 1448, whic[…]
ESP-12F with 8MB, Arduino 1.8.9 and board library […]
i 2 c and spi are not working together on nano si[…]