ESP8266 Support WIKI

User Tools

Site Tools


esp8266-module-family

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
esp8266-module-family [2017/05/14 17:22]
bluejedi [Summary Table]
esp8266-module-family [2018/04/01 04:07]
kernelmode
Line 1: Line 1:
 ====== Modules ====== ====== Modules ======
 Most common modules ESP-NN seem to come from AI-Thinkers vendor. Espressif Systems themselves have produced the ESP-WROOM-02 Wi-Fi Module. Most common modules ESP-NN seem to come from AI-Thinkers vendor. Espressif Systems themselves have produced the ESP-WROOM-02 Wi-Fi Module.
 +
 +All Modules by AI-Thinker : see [[http://​wiki.ai-thinker.com/​_media/​esp8266/​esp8266_module_list.png]]
 +  * 推荐型号 (Green) : Recommended Model
 +  * 停产型号 (Gray) : Discontinued Model
 +
 +Product Specification : [[http://​wiki.ai-thinker.com/​esp8266/​docs]]
 +
 +User Manual : [[http://​wiki.ai-thinker.com/​_media/​esp8266/​a000um01a3.pdf]]
  
 There are also modules from other vendors, such as : There are also modules from other vendors, such as :
Line 50: Line 58:
  
 ^ Pin ^ Name ^ Alternate Functions ^ Notes ^ ^ Pin ^ Name ^ Alternate Functions ^ Notes ^
-| 1      | GND  |           | (Pin 1 is in the corner close to the xtal and away from antenna) |+| 1      | GND  |           | (Pin 1 is in the corner close to the crystal ​and away from antenna) |
 | 2      | NC   ​| ​          | | | 2      | NC   ​| ​          | |
 | 3      | UTXD | SPICS1, GPIO1, CLK\_RTC ​    | Typically used as serial uart0 TX | | 3      | UTXD | SPICS1, GPIO1, CLK\_RTC ​    | Typically used as serial uart0 TX |
Line 101: Line 109:
 {{:​08-04.jpg?​200|}} {{:​08-04.jpg?​200|}}
  
-Two version ​of ESP-08 are on market one whit 7x2 pins (like one on picture) and probably new one with 8x2+ant pins (pinout is same like new 8x2 ESP-07)+Two versions ​of ESP-08 are on the marketone with 7x2 pins (like the one in the picture) and probably ​new one with 8x2+ant pins (pinout is the same like the new 8x2 ESP-07)
  
 {{:​modules:​s-l500.jpg?​200|}} {{:​modules:​s-l500.jpg?​200|}}
Line 183: Line 191:
 {{ esp8266-14_backside.jpg?​300 |}} {{ esp8266-14_backside.jpg?​300 |}}
 Backside of the ESP8266-14 module. Backside of the ESP8266-14 module.
-The ESP8266-14 module has pins and connection ​on three sides of the board+The ESP8266-14 module has pins and connections ​on three sides of the board
  
 {{ esp8266-14_shieldremoved.jpg?​640 |}} {{ esp8266-14_shieldremoved.jpg?​640 |}}
Line 206: Line 214:
  
 ===== Summary Table ===== ===== Summary Table =====
-^ Board ID ^ #Pins ^ Pitch ^ Form factor ^ #LEDs ^ Antenna ^ Ant.Socket ^ Shielded ^ Dimensions mm ^ Flash Size in Bytes and (bits) ^ +^ Board ID ^ #Pins ^ Pitch ^ Form factor ^ LEDs ^ Antenna ^ Ant.Socket ^ Shielded ^ Dimensions mm ^ Flash Size in Bytes and (bits) ^ 
-| ESP-01 | 8 | .1" | 2x4 DIL | Yes | Etched-on PCB | No | No | 14.3 x 24.8 | 512KB (4Mb) ×× | +| ESP-01 | 8 | 0.1" | 2x4 DIL | Yes | Etched-on PCB | No | No | 14.3 x 24.8 | 512KB (4Mb) ×× | 
-| ESP-02 | 8 | .1" | 2x4 notch | No? | None | Yes | No | 14.2 x 14.2 | 512KB (4Mb) × |+| ESP-02 | 8 | 0.1" | 2x4 notch | No? | None | Yes | No | 14.2 x 14.2 | 512KB (4Mb) × |
 | ESP-03 | 14 | 2mm | 2x7 notch | No | Ceramic| No | No | 17.3 x 12.1 | 512KB (4Mb) × | | ESP-03 | 14 | 2mm | 2x7 notch | No | Ceramic| No | No | 17.3 x 12.1 | 512KB (4Mb) × |
 | ESP-04 | 14 | 2mm | 2x4 notch | No? | None | No | No | 14.7 x 12.1 | 512KB (4Mb) × | | ESP-04 | 14 | 2mm | 2x4 notch | No? | None | No | No | 14.7 x 12.1 | 512KB (4Mb) × |
-| ESP-05 | 5 | .1" | 1x5 SIL | No | None | Yes | No | 14.2 x 14.2 | 512KB (4Mb) × |+| ESP-05 | 5 | 0.1" | 1x5 SIL | No | None | Yes | No | 14.2 x 14.2 | 512KB (4Mb) × |
 | ESP-06 | 12+GND | misc | 4x3 dice | No | None | No | Yes | 16.3 x 13.1 | 512KB (4Mb) × | | ESP-06 | 12+GND | misc | 4x3 dice | No | None | No | Yes | 16.3 x 13.1 | 512KB (4Mb) × |
 | ESP-07 | 16 | 2mm | 2x8 pinhole | Yes | Ceramic | Yes | Yes | 21.2 x 16.0 | 1MB (8Mb) ×× | | ESP-07 | 16 | 2mm | 2x8 pinhole | Yes | Ceramic | Yes | Yes | 21.2 x 16.0 | 1MB (8Mb) ×× |
-| ESP-07S | 16 | 2mm | 2x8 pinhole | No | None | Yes | Yes | 17.0 x 16.0 | 1MB (8Mb//??// ​+| ESP-07S | 16 | 2mm | 2x8 pinhole | No | None | Yes | Yes | 17.0 x 16.0 | 4MB (32Mb) | 
-| ESP-08 | 14 | 2mm | 2x7 notch | No | None | No | Yes | 17.0 x 16.0 | ??  //(please fill if you know)// |+| ESP-08 | 14 | 2mm | 2x7 notch | No | None | No | Yes | 17.0 x 16.0 | ?? //(please fill if you know)// |
 | ESP-08 New | 16 | 2mm | 2x8 notch | No | None | No | Yes | 18.0 x 16.0 | ??  //(please fill if you know)// | | ESP-08 New | 16 | 2mm | 2x8 notch | No | None | No | Yes | 18.0 x 16.0 | ??  //(please fill if you know)// |
-| ESP-09 | 12+GND | misc | 4x3 dice | No | None | No | No | 10.0 x 10.0 | ??  //(please fill if you know)// +| ESP-09 | 12+GND | misc | 4x3 dice | No | None | No | No | 10.0 x 10.0 | 1MB (8Mb) | 
-| ESP-10 | 5 | 2mmm? | 1x5 notch | No | None | No | No | 14.2 x 10.0 | 512KB (4Mb) * |+| ESP-10 | 5 | 2mm //??// | 1x5 notch | No | None | No | No | 14.2 x 10.0 | 512KB (4Mb) * |
 | ESP-11 | 8 | 1.27mm| 1x8 pinhole | No? | Ceramic | No | No | 17.3 x 12.1 | 512KB (4Mb) * | | ESP-11 | 8 | 1.27mm| 1x8 pinhole | No? | Ceramic | No | No | 17.3 x 12.1 | 512KB (4Mb) * |
 | ESP-12 | 16 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) //??// | | ESP-12 | 16 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) //??// |
-| ESP-12-F | 22 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) | +| ESP-12F | 22 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) | 
-| ESP-12-E | 22 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) |+| ESP-12E | 22 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) |
 | ESP-12S | 16 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) | | ESP-12S | 16 | 2mm | 2x8 notch | Yes | Etched-on PCB | No | Yes | 24.0 x 16.0 | 4MB (32Mb) |
 | ESP-13 | 18 | 1.5mm | 2x9 | ? | Etched-on PCB | No | Yes | 20.0 x 19.9 | 4MB (32Mb) | | ESP-13 | 18 | 1.5mm | 2x9 | ? | Etched-on PCB | No | Yes | 20.0 x 19.9 | 4MB (32Mb) |
Line 232: Line 240:
 **×   New firmwares can only be flashed on boards with at least 1MB (8Mb) flash.** **×   New firmwares can only be flashed on boards with at least 1MB (8Mb) flash.**
 **×× ​ May be different on different editions of the board.** **×× ​ May be different on different editions of the board.**
-**××× Antenna connector is connected by default, to use PCB antenna switch (solder) the 0Ω resistor ​in the corresponding position.**+**××× Antenna connector is connected by default, to use PCB antenna switch (solder) the 0Ω resistor ​to the corresponding position.**
esp8266-module-family.txt · Last modified: 2018/04/01 04:10 by kernelmode