ESP8266 Support WIKI

User Tools

Site Tools


loading_firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
loading_firmware [2018/03/23 19:03]
jpascher [Prerequisites]
loading_firmware [2018/03/24 09:43] (current)
jpascher [Arduino IDE]
Line 19: Line 19:
 ===== Prerequisites ===== ===== Prerequisites =====
  
-To flash the ESP8266, you'll need first need to wire things up. See [[Start with the ESP-12E and the Arduino tools -> Hardware]] for the basics.+To flash the ESP8266, you'll need first need to wire things up. See [[start-with-esp-12-arduino|start-with-esp-12-arduino ​-> Hardware]] for the basics.
  
 Connect GPIO 0 to ground and reboot the ESP8266 to enter flashing mode. Connect GPIO 0 to ground and reboot the ESP8266 to enter flashing mode.
Line 25: Line 25:
 ===== Arduino IDE ===== ===== Arduino IDE =====
 Arduino now offer a third party plugin to use the Arduino IDE for different CPUs.  Arduino now offer a third party plugin to use the Arduino IDE for different CPUs. 
-See step by step instructions in [[getting-started-with-the-esp8266#​got_an_esp-nn_board_in_the_mail_now_what|Start with the ESP-12E and the Arduino tools]]+See step by step instructions in [[start-with-esp-12-arduino|Start with the ESP-12E and the Arduino tools]]
  
  
loading_firmware.1521831833.txt.gz · Last modified: 2018/03/23 19:03 by jpascher