-->
Page 1 of 2

Adaptor plates.

PostPosted: Tue Feb 21, 2017 6:31 pm
by scrumfled
So I've seen plenty of adaptors which include pads on the underside for an LDO, but they all seem to lack pads for capacitors for the LDO.

Has anyone found a decent adaptor plate yet?

Re: Adaptor plates.

PostPosted: Tue Feb 21, 2017 8:08 pm
by heckler
Are you looking for a PCB that will allow you to plug in and power the esp8266 for testing and code development?? If so for which model esp8266??

I have one that i have developed for the esp8266-01 model.
It has a 3.3v reg, input and output caps, 1 inch oled display, button, place for DS18b20 temp sensors, and all the pins brought out to the edge for other use.

dwight

Re: Adaptor plates.

PostPosted: Tue Feb 21, 2017 9:13 pm
by rudy
I made my own. Have a look at viewtopic.php?p=51890#p51890

I also have a picture there of the cheap adapter plate you most likely are referring to. Even though there are no pads for more parts that doesn't mean you can't add more. I have about six that I added additional parts to.

Re: Adaptor plates.

PostPosted: Wed Feb 22, 2017 10:23 am
by trackerj
I am also doing my own ones : ESP8266 nEXT EVO

Image

also Bare PCB's are available for direct order from DirtyPCB's website: http://dirtypcbs.com/store/designer/details/6858/525/esp8266-cbdb-next-evo-devboard