Most project and tutorial uses nodeMCU as the module for sending data to firebase.
I really need help. Thank you in advance.
Explore... Chat... Share...
Moderator: Mmiscool
rudy wrote:Modules that do not include a 3.3 volt regulator (ESP-01, ESP-12, ESP-M3, ESP-07, ...) are difficult to use. The ESP8266 needs a very good power supply. Good decoupling. The ESP-01 is not as easy to use as a Bluetooth module. The peak current requirements are much higher. And this can lead to unstable operation.
You will write a program and you will never know if the unstable operation is caused by code issues or by poor power. It is highly recommended to develop with a Nodemcu or Wemos type board. Get your code working on those, and then if you have a good reason to want a bare module then give it a try.
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]