Chat freely about anything...

User avatar
By eriksl
#81875 @holopaul, I am also very interested in feedback regarding latencies between the UART and the network. Is it again working like expected?
User avatar
By holopaul
#81951
eriksl wrote:@holopaul, I am also very interested in feedback regarding latencies between the UART and the network. Is it again working like expected?


I gave v22 a spin and at first glance it's still slower than v11. I did a side by side comparison at 9600 baud and the data from v11 comes in a lot smoother than v22. Also v22 is a few ms behind v11. It's a definite improvement over the last two versions and it's quite usable for sure but this is my observation. I will do more experiments and cruch in some timings to be exact.
I used v11 as a reference because it's the first one that i installed and it hasn't crashed once up to this point.
I'll keep you updated with the results. Thanks
User avatar
By eriksl
#81956 That would be very helpful, I'd appreciate that very much.

In the meantime I'll think of tweaks to get the througput smoother. As said, I can't test it myself, I don't have a setup for testing UART input/output, just a terminal emulator, which isn't really good at measuring throughput and latency.
User avatar
By eriksl
#81957 Oh BTW I just found a bug where setting the bridge port to something always ends up setting it to "-1" (which won't work of course). I am going to fix that right now.