Use this forum to chat about hardware specific topics for the ESP8266 (peripherals, memory, clocks, JTAG, programming)

User avatar
By julien derey
#85752 Hello everyone,

\* I am new on this forum so I hope I can post it here
/* sorry for my bad English

I try to establish a link between one ESP8266 master and several ESP8266 slaves (max 5)

I succeed to control one esp by an other one using a request GET from my master (client) to the slave ( server)
But I can’t establish connexion to multiple server from my master.

My master create an access point,
Connect to the first server
Send a GET request
Close the connexion

But can t connect to the server2

However, I can send request to all different server from my phone.

Here the piece of code I use for the master part. (Slaves side works fine)

Is it possible to do it by several GET request or do I to built a MQQT broker or .... ?

Thank you very much for your advices.


Code: Select all

#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>

ESP8266WebServer server (80);
IPAddress IP(192,168,4,4);
IPAddress mask = (255, 255, 255, 0);

WiFiClient client;

/*IPAddress server(192,168,4,15);
IPAddress server2(192,168,4,20);// IP address of the AP
//const char* host = "";*/
String host = "";
String host2 = "";

void setup() {
 // WiFi.mode(WIFI_AP);
  WiFi.softAP("StudioPS", "studioPS");
  WiFi.softAPConfig(IP, IP, mask);
  pinMode(ledPin, OUTPUT);
  Serial.println("Server started.");
  Serial.print("IP: ");     Serial.println(WiFi.softAPIP());
  Serial.print("MAC:");     Serial.println(WiFi.softAPmacAddress());

 server.on("/go", go);



void loop() {
String url = "/go";

 client.connect(host, 80);
    if (client.connect(host, 80)) {
      Serial.println("connected serveur 1");

  Serial.println("envoi serveur 1");

  client.print(String("GET ") + url + " HTTP/1.1\r\n" + "Host: " + host + "\r\n" + "Connection: close\r\n\r\n");

 client.connect(host2, 81);
    if (client.connect(host2, 81)) {
      Serial.println("connected serveur 2");

  Serial.println("envoi serveur 2");

  client.print(String("GET ") + url + " HTTP/1.1\r\n" + "Host: " + host2 + "\r\n" + "Connection: close\r\n\r\n");



void go(){
  Serial.println("serveur ESP12 OK");
//   server.send(200, "text/", "");