What could be wrong? do i really need to flash these three files on the module? is there a single file with the firmware to flash on the module?
PS: i'm using esptool running on OS X to flash the module.
Thanks for your time.
Explore... Chat... Share...
sudo python esptool.py --baud 921600 --port /dev/tty.usbserial-A700fbUH write_flash -fm dio 0x000000 v220.127.116.11\ AT\ Firmware.bin
Running Cesanta flasher stub...
Flash params set to 0x0200
Writing 1044480 @ 0x0... 1044480 (100 %)
Wrote 1044480 bytes at 0x0 in 15.4 seconds (542.6 kbit/s)...
Can you "Talk" to the ESP directly (usin[…]
At least put up some code and (if possible) schema[…]
You really can't use it unless you change flash me[…]
That confirms my suspicions that I can have a clon[…]
Hi, I have two ESP8266 modules, both are in STA+A[…]
Thanks a lot !
Some GPS modules can be polled and will immediatel[…]
Using a development board in stand-alone mode isn'[…]
Hi, versions from 2.5 up are "experimental&qu[…]
In Python, a string is a single-dimensional array […]
I personally got a "similar" issue havin[…]
Hi, Some time ago I made a project with John Lass[…]
Is it possible to program the ESP8266 to behave as[…]
That's why I went back to SPI mode. And that you […]
Doesn't CWSAP have something to do with AT-command[…]
Thanx Guys, I am trying your methods and will upda[…]
The black esp-01 modules need the 1m version. Sele[…]
rocketgeek can you help me out designing pcb trace[…]
Thank you for your response, this is my code v[…]
Hi Mike, I am interested in taking over the projec[…]